A Snake Drain
Cleaner, sometimes known as a "toilet jack" or
"electric eel", is a flexible auger used to remove clogs in plumbing
that cannot be loosened with a plunger.
Most devices consist of a coiled metal
wire with space between the coils at the end. The other end is attached to a
device with a crank that rotates the wire as it moves down into the pipe.
Drains are cleared by one of several mechanisms:
· The auger end of the wire digs itself
into the clog much like a corkscrew, allowing retrieval of the object causing
the clog when the snake is pulled out. (Commonly hair, combs, small toys,
cloth.)
· The end of the snake breaks up the
object, allowing it to pass through the drain. (Commonly tree roots, foam
insulation, plastic objects.)
· The snake flails around the inside
surface of the pipe, scraping off accumulated matter (ranging from mineral
deposits to bacon fat) which was reducing the effective interior diameter of
the drain pipe.
· Hand augers, also known as hand
spinners, are useful for clearing sink and bathtub drains. Note that they
should never be used in toilets, as they may damage the bowl or become knotted
in the large diameter drain pipe beneath. A rule of thumb is that a 1/4"
cable should never be used in a drain larger than 2".
· Closet augers(named after water closets)
feed a relatively short auger through a piece of metal tubing shaped like a
"J". This allows them to easily be fed into water closets (flush
toilets); a plastic boot on the end of the auger protects the finish of the
visible porcelain. Since most toilet clogs occur in the trap built into the
bowl, the short cable is sufficient to break up or retrieve the vast majority
of clogs.
Drum auger
· Heavy-duty drum augers are
motorized and have removable blades that may be attached to the end. These
devices are able to cut through or break up tree roots and other stubborn
objects. Used unskillfully, they will also readily break plastic or copper plumbing.
Many are available with television cameras attached (e.g. Ridgid's SeeSnake
line), allowing inspection of the pipe's condition. Other noted brands include
Roto-Rooter.
If the auger cannot break up or dig
itself into the clog, the clogged section of the pipe (which can usually be
located by measuring the length of the auger that has gone into the pipe) may
have to be replaced.
没有评论:
发表评论